Skip to content
Fulmor Hydrogen Water Bottle
Home / Order
SPE/PEM Hydrogen Water Bottle

Fulmor Hydrogen Water Bottle

Separated SPE/PEM electrolysis for fresh hydrogen water in 2 or 5 minutes.

HWB01 · 400 ml · 2/5 min · USB-C

Price $139.99
Order configurationModel, cycles & included items
ModelFulmor H₂ BottleSilver finish · 400 ml drinking chamber
Cycle selection2 min quick / 5 min high-output4000 PPB target / up to 8500 PPB target
Charging & careUSB-C + included brushFollow the product guide for charging and care.
In the boxHWB01, mineral-water adapter, USB-C cableUser manual, product documentation, and cleaning brush included.
Up to 8500 PPB target5-minute cycle target.
Complete starter setManual, brush, adapter, and USB-C cable included.
400 ml daily bottleSized for a daily routine.
Daily careUSB-C charging, LED feedback, and included brush.
Dual-tank architecture / 04

One bottle. Two water zones. Clearly separated.

Drinking water and electrolysis should not share one chamber. Fulmor keeps them apart—with a 400 ml drinking chamber and a dedicated 20 ml electrolysis reservoir.

Peak Hydrogen Purity 8500+ PPB *Based on 5-minute standard SPE/PEM cycle testing.
Exploded view of the Fulmor hydrogen water bottle architecture
01DRINKING TANKCompletely Separated Drinking Tank & Electrolytic Tank.Holds 400ml of pure drinking water in total isolation, ensuring zero contact with waste gases or metallic flavor.
02ELECTROLYTIC TANKDedicated 20 ml Base Reservoir.Stores dedicated pure water for the electrolysis reaction—separated from your drinking water and engineered to power 100+ cycles per refill.
03CORE SPE/PEM MODULEProton Exchange Membrane Technology.Allow only pure H⁺ ions into your water, while physically blocking and venting ozone (O₃) and impurities.
How it works

Charge. Fill. Run. Rinse.

Fulmor bottle charging through its integrated USB-C portChargeUse the included USB-C cable.
Water being added to the Fulmor bottleFillAdd drinking water above and purified water to the 20 ml electrolysis tank.
Fulmor button operation and water cycleRunChoose 2 minutes or 5 minutes.
Clear Fulmor drinking chamber being rinsed while the control base stays dryRinseDrink soon after the cycle, then rinse.
Specifications

HWB01 details.

Hydrogen targetUp to 8500 PPB target (5 min)
Quick cycle4000 PPB target (2 min)
Capacity400 ml bottle + 20 ml electrolysis tank
Drinking chamberSeparated 400 ml chamber
ControlLED display + physical button
ChargingUSB-C
MaintenanceProduct guide + included cleaning brush
Included itemsAdapter, documentation, brush, USB-C cable
Before you order

Quick answers.

Target concentration may vary with water and operating conditions.

Which water should I use?

Use purified water in the 20 ml electrolysis tank and plain drinking water in the 400 ml chamber. Follow the product manual.

How do the two cycle modes differ?

The 2-minute cycle targets 4000 PPB; the 5-minute cycle targets up to 8500 PPB. Actual concentration varies with operating conditions.

How does the bottle charge?

Connect the included USB-C cable as directed in the product guide.

How should I maintain it?

Follow the product guide and use the included brush. Care needs vary with water and use frequency.

What is included?

The HWB01 unit, mineral-water adapter, user manual, product documentation, cleaning brush, and USB-C cable.